Knowledgebase
barcodeapps.com > BAS and PRiSM for iPad Help Desk > Knowledgebase

Ask a question:


Reset MC55

Solution

Performing a Cold Boot

To perform a cold boot: 
On a numeric keypad, simultaneously press the red Power button and the "1" and "9" keys. 
On an alphanumeric keypad, simultaneously press the red Power button and the W/1 and C/9 keys. 
On an PIM keypad, simultaneously press the red Power button and the "green phone" and "right arrow" keys.

Performing a Clean Boot

A clean boot resets the MC55 to the factory default settings.

All data in the Application folder is retained. You must download the Clean Boot Package file from the Motorola Support Central web site and install on the MC55.

To perform a clean boot:

CAUTION: A clean boot should only be performed by an authorized system administrator. You must connect the MC55 to AC power during a clean boot.

Removing AC power from the MC55 during a clean boot may render the MC55 inoperable. 
Download the Clean Boot Package from the Support Central web site. Follow the instructions included in the package for installing the package onto the MC55. 
Perform a cold boot. 
Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold the left scan button. 
Insert the MC55 into a powered cradle. 
The MC55 updates and then re-boots. 
Calibrate the screen.

Attachments:
55xxw61xxxDBA00001.zip 55xxw61xxxDBA00001.zip

 
Was this article helpful? yes / no
Article details
Article ID: 61
Category: Handheld (Scanner)
Date added: 2012-02-06 18:22:30
Views: 1622
Rating (Votes): Article rated 3.1/5.0 (29)

 
<< Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid